Applying 3M Scotchgard Protector to Carpet and Upholstery
Description:
Scotchgard protector helps protect carpet against oil- and water-based stains. When spills and accidents do occur, the homeowner has more time to get the spot up before it stains the carpet. Scotchgard also has the ability to release stains more easily on carpet and upholstery. When applying Scotchgard to upholstery be sure it is wet cleanable fabric. Do not apply to dry-clean-only fabrics. Check the upholstery tag for cleaning instructions.
Use only a dedicated sprayer for Sctochgard, do not mix with other chemicals. Clean up any over spray while it is wet as it can be difficult to remove once it dries.
Scotchgard protection will last approximately 1 year in residential homes and approximately 3 months commercially.
Recommendation:
Basic Method
- Make sure carpet is clean.
- Using an electric, pump-up or inline sprayer with an 8004 spray tip for carpet, or a 5001 spray tip for upholstery, apply diluted Scotchgard evenly to fibers.
- Rake the Scotchgard into the carpet with a Grandi-Groom or use a soft brush to brush it into the upholstery.
- Use air movers to assist in speed drying carpet or upholstery.
Products and Tools Needed
See Jon-Don Catalog for Full List
|
Item Image |
Name |
Part Number |
|



|
Electric, In-line or Pump-Up Sprayer |
3M-AP1-EA, OE-PFS2-EA OR PA-DS2-EA |
|

|
3M Scotchgard |
3M-SCUP3-01 |
|


|
Grandi-Groom or Upholstery Brush |
CA-G180-EA OR CA-EHHFB-EA |
|

|
Air Mover |
DA-T-EA |
Warning and Cautions:
Always test material for colorfastness, follow label directions and never mix product unless specified in the label directions. Each situation reacts differently and results may vary.
For more information and training, call or visit Jon-Don at 1-800-556-6366 or www.jondon.com. |