Betco HI‑TECH Wet Look ‑ Medium / Frequent Maintenance Floor Finish (5 GL)
- Professionals choice for a great look
- Pressurized emulsified thermoplastics prevent powdering, scuffing, and black marks
- pH: 8.1–8.9
- Coverage: 2,000–3,000 sq ft per gallon
$172.39
Description
Product Information
HI-TECH is a floor finish specifically designed for high-speed maintenance programs. Formulated with a blend of pressure emulsified thermoplastics, this high-solids finish creates a shine superior to conventional acrylic finishes.
Betco HI-TECH contains no dark resins, so the true color of the floor shines through. It leaves a high-gloss wet look and responds well to buffing and burnishing from 300–2,000 RPM.
With self-leveling and self-sealing properties, HI-TECH is easy to apply and reduces costs. One gallon covers 2,000–3,000 square feet, and each coat dries in just 20–30 minutes.
Uses
- Resilient tile
- Terrazzo
- Concrete
- Cork
- Linoleum
- Rubber
Maintenance
- Moderate burnishing required
- Low/high speed compatible
Usage
Usage
RESTORATIVE MAINTENANCE:
- Completely remove all old wax, finish and soil from floor surface following strip procedure instructions on stripper label.
- Floor surface must be clean, dry, and free of residue before finish is applied.
- Rinse with clean water if necessary.
- Apply finish in uniform, thin to medium coats using a clean synthetic finish mop or applicator system. Allow each coat to dry thoroughly before applying additional coats, usually 20-30 minutes. 4-6 coats of finish are recommended.
- Note: This product is a self-sealing finish, however, if tile is old, worn, or porous, initially applying 1-2 coats of a sealer will enhance gloss and long-term performance.
ROUTINE MAINTENANCE:
- Sweep large debris and dust mop (using a water-based treatment).
- Damp mop or automatic scrub using a neutral pH cleaner.
- Buff or burnish the floor as desired. The use of a cleaner/restorer is recommended to condition the floor and extend the time between top scrub and recoating.
INTERIM MAINTENANCE:
- Sweep large debris and dust mop (using a water-based treatment).
- Top scrub the floor using a top scrub cleaner and recommended floor pad to remove the top soiled layers of finish.
- Floor surface must be clean, dry, and free of residue before finish is applied. Apply 1-2 coats of finish as directed above.
- Note: Slip resistance meets or exceeds (ASTM D 2047-93) James Machine 0.5 minimum.
Specs
Specifications
| Material | Cement|Concrete|Tile |
|---|---|
| Category | Floor Finish |
| Brand | Betco |
| Type | Liquid |
| Condition | new |