|
| | Air Movers| | Air Scrubbers | | Moisture
Meters | | Dehumidifiers | | Mold Remediation | | Wall/Floor
Drying | |
Experience
The Force!
|
|
FORCE-9
Larger drying area, a daisy chain
feature and a lower operating noise!
The
Force 9 is the perfect unit for big
losses especially where electricity is
limited. Its low amperage design allows
you to run more units per 15 amp circuit.
And with the Force 9's daisy-chain cord
design you can plug one air mover into
the next and the next for further reach
off the same outlet. When the job is done,
Force 9's easy-carry design makes it a
breeze to load in the truck without breaking
your back. The units also stack in two
different ways: operation and storage. More Info |
|
|
|
|
|
|
|
The Ace Air Mover from Dri-Eaz |
| Height |
24" / 61 cm |
| Width |
20.3" / 51.5 cm |
| Depth |
19" / 48.3 cm |
| Weight |
33 lb / 15 kg |
| Motor |
0.25 hp |
| Motor Speeds |
2-speed |
| Tested CFM |
2000 |
| Static Pressure |
1.0" |
| Power |
1.5 amps |
| Positions |
7 * |
| Stackable for
Operation |
Yes |
| Stackable for
Storage |
Yes |
| Fan Blade |
16" axial / 40.6 cm |
| Safety Listings |
UL,
C-UL |
|
|
|
The Ace TurboDryer has 7 positions!
|
In the ISDT (Intelligent Structural Drying Technology) Age, you need the airmover that can do everything: you need the Ace! The Ace TurboDryer is the newest in a long line of airmover innovations from Dri-Eaz.
It takes all of the lessons learned over the last thirty years of restoration and combines them into the ultimate airmover design. |
| |
|
| The Focus Air Moverfrom Phoenix |
3,000 cfm, long-life
2-speed motor |
 |
|
PHOENIX
FOCUS AIR MOVER |
The
Phoenix Axial Air Mover is the industry's only air mover specifically
engineered with patent pending FOCUS Technology.
FOCUS Technology revolutionizes evaporative drying by producing
air velocities at least 40% greater than competitive product
offerings.
|
More
Information |
|
|
|
|
