Betco Structure Finish With SRT Scuff Resistant Technology (4 GL)

Item # BP-SSRTF-04

Gallon    Qty: 4

Hover Over Image to Zoom
Betco Structure Finish With SRT Scuff Resistant Technology (4 GL)

Item # BP-SSRTF-04

Gallon    Qty: 4

$96.89
  • High gloss, low maintenance, low odor formula
  • Superior black heel mark resistance
  • pH: 7.0–8.5
  • For use on linoleum flooring
  • Coverage: 2,000–3,000 sq ft per gallon
Description

Product Information

Betco Structure Finish with SRT is a high-gloss, low-odor floor finish specifically designed for use on linoleum and marmoleum floors. Structure Finish provides superior resistance to black heel marks and scuffs. It helps to reduce maintenance and prolong the life of the floor.

 

This finish responds to low to moderate burnishing and can safely be stripped off as part of the Defender™ Linoleum System. One gallon covers 2,000-3,000 square feet per gallon. 

 

Structure Finish is ideal for use in healthcare, education, and retail facilities.

Usage

Usage

Directions for Use

Read the entire label before using this product. Recommended for use on all types of linoleum flooring and properly prepared hard surfaces.

RESTORATIVE MAINTENANCE: Completely remove all old wax, finish, and soil from floor surface following strip procedure instructions on Vanisher™ stripper label. Floor surface must be clean, dry, and free of residue before finish is applied. Rinse with clean water if necessary. Apply 2-3 coats of finish in uniform, thin to medium coats using a clean synthetic finish mop or applicator system. Allow each coat to dry thoroughly before applying additional coats, usually 30-40 minutes. Elevated temperatures and humidity may extend dry time.

 

ROUTINE MAINTENANCE: Damp mop or automatic scrub using a floor cleaner. Buff or burnish the floor as desired. The use of a cleaner/restorer is recommended to condition the floor and extend the time between top scrub and recoating.

 

INTERIM MAINTENANCE: Top scrub the floor using a top scrub cleaner and recommended floor pad to remove the top soiled layers of finish. Floor surface must be clean, dry, and free of residue before finish is applied. Apply 1-2 coats of finish as directed above.

 

Note: Slip resistance meets or exceeds (ASTM D 2047-04) James Machine 0.5 minimum.

Specifications

Specifications

Brand Betco
Material Linoleum
Product Type Liquid
Category Floor Finish
Condition New